The use of a proper gutter system allows efficient drainage of water from the roof covering which is crucial for its durability and functionality. It also protects the façade of the building from damage caused by moisture.
INGURI 125/87 and 150/100 systems are complete gutter systems, manufactured from top quality steel coated on both sides. All system components have been designed to ensure correct fit and easy and quick installation.
The shape and depth of the gutters ensure effective water drainage even during heavy and prolonged rainfall.
Using the right gutter system allows water to be efficiently drained from the roofing material which is crucial to its durability and functionality. It also protects the facade of the building from the effects caused by moisture. Gutter system INGURI 125/87 and 150/100 is a complete system produced from the highest quality organic coated steel or metallic coating Aluzinc. This system will effectively protect your home.
RELIABLE TIGHTNESS
The joint with the stabilizer is equipped with a gasket that ensures the tightness of the system even under extreme weather conditions. Complementary to the gutter is a bottom, equipped with gaskets, with the possibility of riveting and screwing.
EXCELLENT WATER DRAINAGE
INGURI gutters are much deeper than competitive products, this design prevents the phenomenon of overflow of water outside the gutter, which occurs during heavy rainfall. Ergonomic gutters protect the facade against stains.
HIGH RESISTANCE TO WEATHER CONDITIONS
Used for the manufacture of INGURI gutter systems sheet metal with a thickness of 0.6 mm is coated with an organic layer. The coating has a very high resistance to atmospheric factors and mechanical damage and influence of sun rays (UV) responsible for loss of color. INGURI systems are also produced from Aluzinc 185 sheets with an additional Easyfilm polymer coating on both sides.
PEACE OF MIND FOR YEARS
INGURI system is covered by 30-years manufacturer warranty. Such a long warranty period is ensured by high quality of the input material and many years of experience of the manufacturer. By using materials with the highest technical parameters, we give our customers a product that provides peace of mind for years.
SIMPLE INSTALLATION
INGURI system consists of perfectly matching elements thanks to which installation is easy and quick.
INGURI ON THE MOVE
The long pieces are protected with a special foil sleeve so that the delivered material remains flawless. The gutters are transported in a specially equipped vehicle with balcony systems to warranty the safety of the material.
WIDE RANGE OF COLORS
The offer of a complete gutter system INGURI includes a wide range of colors that allow the gutter system to put the finishing touches to the roof. The right choice of gutter system guarantees a flawless effect of the investment and harmony.
COMPLETE OFFER
When you buy a complete roofing with gutter system INGURI, you get a longer warranty.
30 years ULTIMAT [UTK] coating.
40 years HERCULIT [HC] coating.
DESCRIPTION OF ELEMENTS
Gutter
Inner corner
Outer corner
Gutter fasteners + stabilizer
Gutter outlet
Gutter end cap
Gutter support
Corner cover
Drain pipe
Drain pipe elbow
Spout
Tee pipe
Cleanout
Sleeve
Screw clamp
Dowel for screw clamp
Drain pipe clamp half
Pipe clamp for dowel
Top rafter hooks
Face hook
Universal settling tank „BUT”
Flexible elbow „BUT”
Basket for the drain
Clamp holder for sandwich panel
GUTTER
The shape of INGURI gutters is specially designed to ensure high efficiency in draining water. They have great depth and the proper profile to effectively collect water from the roof slope even during heavy rainfall without the risk of overflow. We manufacture gutters in standard lengths of 4 and 3 m.
INNER/OUTER CORNER
Aesthetic and functional connection of gutters in the corners of the building is ensured by gutter corners. Our range includes outer and inner corners with a standard 90° angle as well as 135° versions.
DRAIN PIPE
The drain pipe collects water from the gutters and directs it to the spout. The design and proper installation of this element greatly affects the functionality of the entire drainage system. The gutter drain of the INGURI systems is very well matched to the other components, ensuring a tight and solid installation. Available versions: 125/87, 125/100, 150/100.
CORNER COVER
The cover prevents water from overflowing through the corner. This is particularly important if it is fitted to an inner corner that receives large amounts of water from the valley gutter. It also has an ornamental role.
GUTTER FASTENER
The individual sections of the gutter or the gutter with the corner are connected by means of a dedicated fastener. INGURI systems are equipped with a clip fastener (snap mechanism) to ensure a strong and durable joint with quick and easy installation. The standard fitting of the fastener with a gasket guarantees a tight connection while the execution of the element of sheet metal of the same colour as the remaining parts of the system ensures high aesthetics. The fastener is equipped with a stabiliser as standard, which additionally stiffens the joint.
TEE PIPE
If it is necessary to discharge water from two drain pipes into one spout, a tee pipe should be used.
SPOUT
The starting element of a gutter system is the spout, which carries the water away from the drain pipe. The product on offer has an angle of 63° and a section of 87 or 100 mm.”
DRAIN PIPE ELBOW
It allows the system components to be adapted to different roof and façade shapes. The offered product is bent at an angle of 63°.”
Drain Pipe
INGURI system drain pipes have a cross-section of 87 and 100 mm. Standard pipe lengths are 3m and 1m. Fixing to the façade is carried out using dedicated clamps to ensure adequate distance from the building wall.
TOP RAFTER HOOK
The top rafter hook is mounted directly to the rafters of the roof.
CLEANOUT
This element stops and enables the removal of debris falling into the drain pipe together with the water, such as leaves, feathers and small branches. This helps to maintain the system’s patency and, as a result, its full functionality.
FACE HOOK
The face hook is a gutter fixing element mounted to the eaves fascia board.
GUTTER SUPPORT
An element for additional fixing of the gutter to the roof structure. It prevents deformation or breakage of the gutter as a result of heavy loads, e.g. due to snow sliding off the roof.
GUTTER END CAP
A component used to close the gutter at its ends. The offered cap has a large depth and is additionally equipped with a gasket.
PIPE CLAMP / SCREW CLAMP
We offer two types of clamps: those with mounting holes for any type of fastener and those adapted for a dedicated connector.
SLEEVE
Drain pipes are connected by means of a sleeve. The precise manufacture of this element means that there is no risk of leakage at the joint.
DOWELS FOR SCREWED CLAMPS
We supply dowels for clamps in three lengths: 160, 250 and 300mm.
ACCESSORIES
We ensure the availability of accessories for gutter systems: gliding spray, silicones and touch-up paint.
Gutter settling tank type BUT
The gutter settling tank is a key component in the rainwater drainage system, playing a significant role in connecting downpipes to rainwater pipes and acting as a revision. Equipped with a special screen, it collects debris such as fallen leaves or pinecones, which are discharged together with the rain falling from the roof. This solution also provides protection for the concealed components of the sewer and drainage system, guarding against possible blockages and damage. Removal of accumulated dirt is extremely easy – simply lift the lid and remove the basket.
Flexible elbow “BUT”
The flexible elbow is designed to connect the gutter settling tank to the sewer components. Thanks to its flexibility, it allows installation errors to be easily corrected, especially when the drain outlet is not perfectly aligned with the downpipes. The elbow has a diameter of 110 mm and has a gasket in the narrower part, which effectively prevents rainwater leakage. It is made of polypropylene, a weather-resistant material, and is available in a carefully selected shade of light grey.
FEEDSTOCK
The suppliers of material for the manufacture of INGURI gutters are renowned steel corporations, providing the highest quality steel in the form of Aluzinc sheets – galvanised and coated – which are the input material for the manufacture of gutters.
Careful selection of the feedstock supplier has a major impact on the quality and durability of the product. This is expressed by its resistance to corrosion and discolouration.
This is why INGURI gutter systems are covered by a long-term warranty.
Technical specification
Coatings and colours
INGURI
ALUZINC [AZ 185]
Available colours
RAL 7016
RAL 3011
RAL 7024
RAL 8004
RAL 8017
RAL 8019
RAL 9002 *
RAL 9005
INGURI pipes are manufactured from sheet with hot galvanized feed, which after chemical cleansing and undergoing passivation is coated with anti-corrosion coats and a decorative, organic coat. The sheet is 0,6 mm thick, with the organic layer being material of high resistance to atmospheric conditions and mechanical damage, as well as UV radiation that causes color loss. The INGURI Systems are also manufactured from aluzinc 185 sheets with additional double-sided polymeric Easyfilm® polymeric coating.
Warranty period: 30 years * * Detailed warranty conditions are specified in the warranty card. * White color is only available for INGURI 150/100 system .
It is a steel sheet coated on both sides with an aluminium-zinc alloy in a process similar to hot-dip galvanizing. Thanks to this, it meets the strictest requirements for sheet resistance to atmospheric corrosion and corrosion in humid environments. It also has a protective Easyfilm polymer coating.
Warranty period: 15 years * * Detailed warranty conditions are specified in the warranty card.
Are you a roofer, distributor or designer? BP2 NEWS is not spam, it's a content-rich industry mailing - follow roofing trends and BP2's rapidly growing offerings with us!
eProfil
![ALUZINC [AZ 185]](https://bp2.eu/wp-content/uploads/2022/03/powloka-aluzinc-www.jpg)
