PROTECTING YOUR HOME
The use of the right gutter system enables water to be drained efficiently from the roofing, which is crucial to its durability and functionality. It also protects the facade of the building from damage caused by excess water. The INGURI 125/87, 125/100 and 150/100 gutter system is a complete system manufactured from top-quality organic-coated steel or metallic-coated ALUZINC [AZ]. This system will effectively protect your home.
RELIABLE TIGHTNESS
A connector with a stabiliser ensures there are no leakages in the system, even in extreme weather conditions. The gutter is completed with a universal cap with a gasket.
EXCELLENT WATER DRAINAGE
INGURI gutters are considerably deeper than competing products, this design prevents water from overflowing outside the gutter, which occurs during heavy downpours. Ergonomic gutters protect the façade from dripping water.
HIGH WEATHER RESISTANCE
The 0.6 mm thick sheet metal used for INGURI gutter systems is coated with an organic layer. The coating has a very high resistance to atmospheric factors and mechanical damage, as well as to the effects of solar radiation (UV) responsible for colour loss. INGURI systems are also manufactured from ALUZINC [AZ] 185 sheets with an additional Easyfilm® polymer coating on both sides.
PEACE OF MIND FOR YEARS
The INGURI system is covered by a 30-year manufacturer’s guarantee. This long guarantee period is ensured by the high quality of the input material and the manufacturer’s many years of experience. Thanks to the use of materials with the highest technical parameters, we place in the hands of our customers a product that provides peace of mind for many years.
SIMPLE INSTALLATION
The INGURI system is made up of perfectly matching components, making the installation quick and easy.
INGURI IN TRANSPORT
Long elements are covered with a dedicated foil to protect them from scratching during transport. In addition, the gutters are placed in a plastic sleeve, the purpose of which is to effectively isolate and protect against dirt. The transport of the gutters is carried out in a specially prepared vehicle equipped with appropriate support, thus guaranteeing the safety of the material.
WIDE RANGE OF COLOURS
The complete INGURI gutter system includes a wide range of colour options, thanks to which the gutter system can be matched to almost any type of roof and façade. The right choice of a gutter system guarantees a flawless effect and finish.
COMPREHENSIVE OFFER
By purchasing the complete roof covering, you can tailor the INGURI gutter system to your needs.
GUTTER
The shape of the INGURI gutters has been specially designed to ensure high efficiency in draining water. They have a great depth and the right profile to effectively collect water from the roof slope even during heavy rainfall without the risk of overflow. We manufacture gutters in standard lengths of 4m and 3m. The gutters are packed in 5 pieces in dedicated sleeves to protect against waste.
DRAIN PIPE
INGURI system downpipes have a cross-section of 87 mm and 100 mm. Standard pipe lengths are 3 m and 1 m. Fixing to the façade is carried out using dedicated clamps to ensure adequate distance from the building wall. The specially coupled ends allow the pipes to be quickly installed on high buildings without the need for additional couplers.
GUTTER CONNECTOR
The individual gutter sections or the gutter and corner are connected with a dedicated connector. INGURI systems are equipped with a two-link (wide) connector to ensure a strong and durable connection with fast and simple installation. It is the only gutter connector available on the market made of 0.8 mm sheet metal with a slip seal. The connector is equipped with a stabiliser as standard, which additionally stiffens the joint.
OUTER/INNER CORNER
An aesthetically pleasing and functional connection of the gutters in the corners of the building is ensured by the corners. Our range includes external and internal corners with a standard 90° angle, as well as versions with a 135° angle.
GUTTER DRAIN
The drain collects water from the gutters and directs it to the downpipe. The design and proper installation of this component greatly affects the functionality of the entire drainage system. The gutter drain of the INGURI systems is very well fitted to the other elements, ensuring a tight and solid installation. Available versions: 125/87, 125/100, 150/100.
GUTTER END CAP
A component used to close a gutter at its ends. The offered cap has a large depth and fits on both sides of the gutter.
FASCIA HANGER 125/150
A fascia hanger is a gutter fixing element fitted to the eaves fascia board.
ELBOW 63° 87/100
It allows the system elements to be adapted to different roof and façade shapes. The product offered is profiled at an angle of 63°.
ROOF HANGER 125/150
The rafter hanger is mounted directly to the rafters of the roof. Available in two sizes: 125 mm made of 4 mm thick, 25 mm wide strip and 150 mm made of 5 mm thick, 27 mm wide strip.
SPOUT 87/100
The starting element of the gutter system is the spout, which carries the water away from the downpipe. The product on offer has an angle of 63° and a cross-section of 87 or 100 mm.
SLEEVE
The downpipes are connected by means of a socket. The careful workmanship of this element means that there is no risk of leakage at the connection point.
CLEANOUT 87/100
This element retains and enables the removal of debris that falls into the downpipe with the water, such as leaves, feathers, small branches. This helps to maintain the patency of the system and, as a result, its full functionality.
SCREW CLAMP 87/100
Our range includes clamps fitted with special mounting holes suitable for a dedicated double-threaded long sleeve connector.
TEE 63° 87/100
If it is necessary to drain water from two downpipes into one downpipe, a specially adapted tee can be used. The T-piece is available in 87 mm and 100 mm sizes.
BASKET FOR THE DRAIN
Effectively traps leaves, branches and other debris that may block the free flow of water into the downpipes – very easy to install.
FLEXIBLE ELBOW “BUT”
It is used to connect the settler to the 110 sewer pipe.
UNIVERSAL SETTLING TANK BUT
The horizontal gutter skimmer, for trapping waste from the roof, additionally features a storm flap. The BUT gutter trap is available in 4 colours.
CLAMP HOLDER FOR SANDWICH PANEL
Used for the installation of downpipe clamps on the sandwich panel, fixed in 4 places. Colours matched to the INGURI range.
The use of the right gutter system allows water to be drained efficiently from the roofing, which is crucial to its durability and functionality. It also protects the façade of the building from damage caused by moisture.
The INGURI 125/87, 125/100 and 150/100 systems are complete gutter systems, manufactured from top quality steel coated on both sides. All components of the systems have been designed to ensure correct fit and easy and quick installation.
The shape and depth of the gutters ensure effective drainage even during heavy and prolonged rainfall.
The suppliers of the material for the INGURI gutters are renowned steel corporations, providing the highest quality steel in the form of ALUZINC [AZ] sheets – galvanised and coated – which are the input material for the produduction of the gutters.
Careful selection of the supplier of the material has a major impact on the product’s quality and durability. This is reflected in its resistance to corrosion and discolouration.
This is why INGURI gutter systems are covered by a long-term guarantee.
Available colours
INGURI gutters are manufactured from sheet metal based on a hot-dip galva- nised material which, after chemical cleaning and passivation, is coated multiple times with an anti-corrosive and decorative organic coating. The thickness of the sheet is 0.6 mm, while the organic layer is made of a material with very high resistance to atmospheric conditions, mechanical damage and the effects of solar radiation (UV) responsible for the discolouration.
It is a steel sheet coated on both sides with an aluminium-zinc alloy in a process similar to hot-dip galvanising. As a result, it meets the most stringent require- ments for sheet metal resistance to atmospheric corrosion and corrosion in humid environments. It additionally has a protective Easyfilm® polymer coating.
Catalogues / Leaflets
Pricing Lists
Assembly Instructions
Declarations
Other
© Copyright 2025 BP2 sp. z o.o.